MUTOH XPJ-661UF, Руководство по эксплуатации

Страница: 18 / 174

18 Requirements for usable media
Media that meet the requirements below can be used with this printer.
To achieve expected print quality, follow the instructions below.
Failure to follow these instructions could result in damage to the printer.
• Use media with no wrinkle, fold or curl.
If media does not sit flat on the table, secure it on the table using a thin tape to avoid any warps.
• If media has a chance to be deformed while printing, secure it on the table using a thin tape to avoid head strike.
• Do not use media that is sensitive to heat.
The heat given off by the UV rays could deform such media, or affect its image quality, or cause it to contact with the head.
• If printing onto a solid object that is liable to roll (such as a golf ball or ballpoint pen), use a jig or similar to stop it from
rolling.
• When loading a small and heavy object or a jig on the table, place it as close to the center of the table as possible.
• Printing on non-flat surface media will generate ink mist, causing malfunction or damage to the printer.
• If you are printing on non-flat surface media and there is large distance between the print head and media, you may not
be able to achieve predictable print quality.
To print on such media with more than 0.5 mm height difference, it is recommended to use the "Low Speed" printing mode.
It allows you to print on media up to 2.0 mm height difference and helps to minimize the ink mist, ink bleeding or layer shift.
"** > 6: Low Speed" P. 73
• Printing on a light reflective material may have a chance to cure the ink on the print head, causing malfunction or damage
to the product. To print on such materials, it is recommended to mask the non-print area on the material.
Requirements for usable media
Usable sizes
Maximum width 483 mm
Maximum length 594 mm
Maximum thickness 150 mm
Surface height difference approximately -0.5 mm maximum
Weight up to 6 kg (including jig)
Important!
The minimum media width and length that are settable in the User Type for the printer are 30 mm x 30 mm. To print onto media
with dimensions smaller than these, you should take precautions to prevent the table from being dirtied with ink.
Note
Contact your local MUTOH dealer about roll media recommended for your printer.
Cautions for handling media