MUTOH XPJ-661UF Скачать руководство пользователя

Страница: 120 / 174

120 Performing Daily Maintenance

[4]

If the ink cannot be removed completely, remove the emitting window glass from the lamp and use the supplied

scraper to clean it off.

• Slide up the left side of the exhaust fan cover. The right side screw serves as a fulcrum.

• Slide the glass on the bottom of the lamp towards the front to remove it.

• Press the scraper on the ink deposits with a slight angle and scrape it off.

• Use the paper towel to clean the ink scraped from the glass.

• Put the glass back on the lamp.

• Firmly slide it into the end and then put the exhaust fan cover back in place.

Important!

• Make sure to use the scraper supplied with the printer.

• Do not press the edge of the scraper too hard. This will cause damage to the glass.

• Make sure that a new glass is attached to the lamp and the exhaust fan cover is put back in place. Using your printer without

them will cause damage to the lamp.

[5]

Next moisten the surface of print head nozzles.

Scraper

Содержание XPJ-661UF















































































































































































Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды

MUTOH XPJ-661UF, Руководство по эксплуатации

Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды