MUTOH XPJ-661UF Скачать руководство пользователя

Страница: 152 / 174

152 Transporting

[4]

Attach the head fixing plate with screws.

• Slide the head fixing plate leftward to attach it.

•

Use the hexagon wrench supplied with the printer.

Important!

Attach the head fixing plate carefully, so that it does not scratch any of

the surrounding parts.If they are scratched, the print quality could drop.

[5]

Attach the UV-LED lamp fixing plate with screws.

• Slide the UV lamp fixing plate in from the front side of the printer

until it reaches to the head fixing plate.

• Use the hexagon wrench supplied with the printer.

Important!

Attach the UV-LED lamp fixing plate carefully, so that it does not scratch

any of the surrounding parts.If they are scratched, the print quality could

drop.

[6]

Turn the handle half rotation anticlockwise.

• It lowers the table.

Important!

DO NOT turn the handle too much.

It can cause damage to the printer.

[7]

Attach two table fixing plate with screws.

• Use the hexagon wrench supplied with the printer.

[8]

Attach two table fixing plate with screws.

• Use the hexagon wrench supplied with the printer.

× 10

× 2

× 8

× 2

Содержание XPJ-661UF















































































































































































Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды

MUTOH XPJ-661UF, Руководство по эксплуатации

Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды