MUTOH XPJ-661UF, Руководство по эксплуатации

Страница: 128 / 174

128 Clean daily maintenance parts
The maintenance procedure and parts to be cleaned are the same as
"Daily Maintenance" P. 116
.
Follow the steps described in
"Performing Daily Maintenance" P. 119
to clean each part.
•
"Cleaning of UV Lamp" P. 119
•
"Moistening the surface of print head nozzles" P. 121
•
"Cleaning of print head circumference" P. 122
•
"Cleaning of cleaning wiper and the circumference of the cap" P. 123
[7] The message on the left will appear.
• You can start maintenance.
2.
Cleaning daily maintenance parts
Important!
Make sure to complete this maintenance within 5 minutes while the printer is in Daily maintenance state.
3.
Finishing maintenance
[1] Hold the tab on the maintenance cover as shown on the left to gently
open the cover.
When closing the maintenance cover, hold the tab on the maintenance cover to gently close it.
Do not place your fingers on the edges of the printer’s opening portion, or on any parts around those edges. Your fingers could
get caught and be injured.
[2]
Tap [Enter].
[3] The printer automatically performs the Short cleaning.
[4]
• Dispose of the used cleaning stick.
• Use a paper towel to wipe the maintenance cleaner off the dropper.
• Dispose of the maintenance cleaner in the plastic cup and dry the cup well using the paper towel.
• Use a paper towel to clean the tray.
Daily Maintenance
End ー＞ Enter
CAUTION
Daily Maintenance
End ー＞ Enter