MUTOH XPJ-661UF Скачать руководство пользователя

Страница: 130 / 174

130 Inside cleaning

Cleaning period:

•

Monthly

Inside cleaning

• When cleaning table, do not apply too much pressure on the table.

It can affect print quality.

Cleaning on the table

[1]

Hold the handle on the front cover to gently open it.

[2]

Clean away dirt from the table using a cloth soaked in water and

thoroughly wrung out.

Important!

• Do not blow off dusts inside the product with a gas duster.

Dust can attach to moving parts, causing abnormal sound or

malfunctions.

• Do not rub the hardened ink on the table with the included scraper.

The table may be damaged.

Note

If ink on the table cannot be removed, use your personal resin squeegee or scraper

to remove it. Be sure not to damage the table.

[3]

Close the front cover slowly, holding it by the place shown in the

picture.

CAUTION

Содержание XPJ-661UF















































































































































































Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды

MUTOH XPJ-661UF, Руководство по эксплуатации

Результаты поиска

Содержание XPJ-661UF

Отзывы:

Похожие инструкции для XPJ-661UF

Бренды по названию

Популярные бренды