MUTOH XPJ-661UF, Руководство по эксплуатации

Страница: 37 / 174

Loading media 37
[2]
Use the or to input the media length.
Tap [Enter].
Note
Any value from 30 mm to 594 mm can be set for the length.
[3]
• Use or to enter the PF (longitudinal) value.
• Use or to enter the CR (lateral) value.
• Tap [Enter].
Note
any value between the following range can be entered:
PF value: 0.0 to 574.0
CR value: 0.0 to 463.0
• The table will move inward.
• The carriage will move to the set position, with its LED pointer lit steady.
[4] Check the position of the LED pointer.
• If it shows the correct position, tap [Enter].
• If it is not in the intended position, adjust the origin position as follows:
• Use or to move the table forward/backward.
• Use or to move the LED pointer leftward/rightward.
• Tap [Enter].
The message on the left will appear.
That completes setting of the media.
**:Length:
(30 - 329) 329 mm
**:Origin:
PF： 0.0 CR： 0.0
Moving To
Origin Position
**:Origin:
PF： 0.0 CR： 0.0
Please Wait
Print Ready
Type 1