MUTOH XPJ-661UF, Руководство по эксплуатации

Страница: 156 / 174

156 How to perform initial ink charging after ink discharge
How to perform initial ink charging after ink discharge
[1] Long press the Power button.
• The keys on the operation panel light up.
• The printer will start mechanical initialization.
[2]
Tap [Enter] when the message on
the left appears.
[3]
When the message on the left appears, empty the waste ink tank.
"Drain waste ink into a container" P. 112
under
"Emptying waste ink
tank"
[4] The message on the left will appear.
[5]
• Use to choose the menu shown left.
• Tap [Enter].
Note
（
When you use your printer for the first time or after you replace the waste ink
tank
）
If no or small amount of waste fluid is collected in the waste ink tank, you
may not be able to drain fluid out of the tank.
The message on the left will appear.
[6] Make sure you agitate the ink cartridge after you unpack it.
• Turn the ink plug upward and wait for three seconds.
• Next, turn the ink plug downward and wait for three seconds.
• Repeat that 10 times.
Note
•
You do not have to agitate varnish ink before use.
Ink Charge
Start ー＞ Enter
Empty Waste Ink Tank
then Tap Enter
Empty the Tank？
No
Empty the Tank？
Yes
Insert InkCartridges
3 sec.
x 10
3 sec.