Motortech PoewerView3, Руководство по эксплуатации

Страница: 48 / 138

8 General Operation
48 Rev. 02/2018
Symbol Function
This button informs about the status of the access control:
– Operator , Service , Master : The corresponding access level is set.
– Locked : The Read Only access level is set.
– Disabled : The access control is disabled.
By tapping this button, you can access the Access Control view. There is
more information in the section Access Control on page 65.
Status information of added devices is shown in the lower field of the
menu bar.
The database symbol provides information on the following states:
Trend data of added devices are recorded on the SD card inserted
in the PowerView3.
An error has occurred while recording the trend data (e. g.
insufficient memory space on SD card, SD card not readable).
The communication status symbol provides information on the following
states:
There is a connection to all added devices.
The connection is not established to all added devices.
No device is connected.
The system time is displayed at the very bottom.
If you tap the button for the connection status, the Event Log view opens.
There is more information in the section Event Log on page 72.