Motortech PoewerView3, Руководство по эксплуатации

Страница: 123 / 138

9 Devices
Rev. 02/2018 123
The PowerView3 switches the binary output 1 (Warning) when warning thresholds are not met
and the binary output 2 (Error) when shutdown thresholds are not met, if the following
prerequisites are fulfilled:
– The binary outputs are activated in the PowerView3 (see section Devices on page 51).
– At least one channel is activated (see section Activation on page 121 or Channels on
page 117).
– At least the checkbox Warning Output or Error Output is activated (see section Channels on
page 117).
The colors of the temperature displays in the Overview and in the group-specific views are
dependent on the threshold settings (see sections Overview on page 112 and Group-Specific
Views on page 125).
Changes are made to selected channels. You have the following options for selecting channels:
– Tap the desired channel directly to select it. To remove the channel from the selection, tap
the channel again.
– Tap a group symbol (e. g. ) to reverse the selection of the respective group.
▸ Selected channels have a blue frame.
– Tap to clear all selections.
For the selected outputs, set the thresholds using the arrow keys:
– With and in steps of 1 °C or 1 °F
– With and in steps of 20 °C or 20 °F
To save the set warning and shutdown thresholds permanently in the TempScan temperature
module, use the
Back button to go back to the Preferences view and tap the Store Setup button.
Minimum separation of threshold values
The threshold values High Temp. Shutdown , High Temp. Warning and Low
Temp. Warning must each be separated by at least 10 °C (18 °F).