Motortech PoewerView3, Руководство по эксплуатации

Страница: 55 / 138

8 General Operation
Rev. 02/2018 55
8.4.1.3 Editing a Device
In order to edit the settings for a device, proceed as follows:
1. In the Device Setup view, select the device whose settings you want to change under Remote
Device .
2. Tap the Edit button.
▸ The dialog for editing devices opens.
3. Enter the device type and node ID.
4. Tap Save .
▸ The dialog is closed.
▸ The device is displayed with changed settings in the Device Setup view and in the Start
Menu .
8.4.1.4
Deleting a Device
To delete an added device, proceed as follows:
1. In the Device Setup view, select the device that you want to delete under Remote Device .
2. Tap Delete .
▸ The device is no longer displayed in the
Device Setup
view and in the
Start Menu
.
8.4.1.5 Logging Device Data
The PowerView3 enables you to record trend data (e. g. speed, knocking intensity and
temperature) of added devices on an SD card inserted in the PowerView3. You can then display
and administer the recordings with the PowerView3 (see section
Recordings on page 62) or the
MOTORTECH Trend Viewer (see section Recordings on page 62). For each device, you can start
and stop the recording of trend data in the Device Setup view.
Starting a Recording
1. Make sure that a suitable SD card is inserted into the memory card slot of your PowerView3
(see
Interfaces on page 24).
2. In the Device Setup view, select the device whose data you would like to record in the area
Remote Device . If the device has the recording status OFF under Logging , no data is recorded
from the device.
3. Tap the Logging button.
▸ The device's recording status in the Remote Device area changes to ON .
▸ A database symbol in the menu bar indicates that data is being recorded.
▸ You can start or end more recordings and use other functions of the PowerView3 without
an active recording ending.
▸ The recording is not interrupted by the screen saver.