Motortech PoewerView3, Руководство по эксплуатации

Страница: 118 / 138

9 Devices
118 Rev. 02/2018
Tag
To enter an abbreviation, proceed as follows:
1. Tap in the field below Tag .
2. Enter an abbreviation (maximum five characters) via the on-screen keyboard and confirm
with
OK .
▸ The abbreviation is displayed and then always used in the user interface of the
PowerView3 if there is insufficient space for the full name.
Name
Name the channel as follows:
1. Tap in the field below Name .
2. Enter a channel name (maximum 20 characters) via the on-screen keyboard and confirm with
OK .
▸ The name is displayed.
Thermocouple
Set the thermocouple type that is connected to the channel of the TempScan temperature
module accordingly.
Status
In the Status area you have the following options:
– Activate the checkbox Channel Enabled to activate the displayed channel for displaying
measured values in the PowerView3.
– Activate the checkbox Warning Output , so that binary output 1 (Warning) is activated for the
displayed channel if the warning thresholds are not met.
– Activate the checkbox Error Output , so that binary output 2 (Error) is activated for the
displayed channel if the shutdown threshold is not met.
Group
Assign a channel to one or several groups. Activate the checkbox for the desired groups.
Limits
The PowerView3 switches the binary output 1 (Warning) when warning thresholds are not met
and the binary output 2 (Error) when shutdown thresholds are not met, if the following
prerequisites are fulfilled:
▸ The binary outputs are activated in the PowerView3 (see section Devices on page 51).
▸ At least one channel is activated.
▸ At least the checkbox Warning Output or Error Output is activated.