6 Installation Instructions
34
Rev. 02/2018
2.
Cut a rectangular opening with the following dimensions into the control cabinet door:
3.
If necessary, remove sharp edges.
4.
Carefully insert the PowerView3 into the opening from the outside.
5.
Hold the PowerView3 firmly while a second person hooks in the four attachment clamps in
the openings provided for this on the sides of the device.
6.
Carefully screw in the four fixing screws from the back while the second person firmly holds
the PowerView3.
7.
Check if the PowerView3 is mounted tightly in the correct position.
▸
You can now wire the device (refer to section
Wiring of the Device
on page 35).
Содержание PoewerView3
