Motortech PoewerView3, Руководство по эксплуатации

Страница: 77 / 138

9 Devices
Rev. 02/2018 77
– Ignition Enabled
The status display shows whether the ignition controller has received an ignition enabled
command.
–
Gray: Ignition is not enabled.
–
Green: Ignition is enabled.
–
Yellow: Ignition is enabled but the ignition controller is waiting for the engine to stop.
– System
The status indicator displays the system status.
–
Gray: No signal is received.
–
Green: The system works flawlessly.
–
Yellow: There are warnings or alarms, which do not lead to an engine stop.
–
Red: There are errors, which lead to an engine stop. The ignition controller is put into
error condition when errors occur.
– GPO
The status display displays the status of the general purpose output (GPO). The functions of
the general purpose output are set in the MICT. (Further information can be found in the
operating manual of your ignition controller.)
–
Green: The general purpose output is switched.
–
Gray: The general purpose output is not switched.
– Schedule
The status indicator displays the active schedule of the ignition controller. If schedules have
been named in the MICT, the names are displayed (for example
BIOGAS and NATURAL GAS ).
If no names have been assigned, the schedules are called A and B in the PowerView3.
–
Gray: The schedule is not active.
–
Blue: The schedule is active.
– Engine Speed
In the analog display the current engine speed is presented with a pointer and also
numerically.
–
Green area: The engine speed is below nominal speed.
–
Yellow area: The engine speed is between nominal speed and overspeed.
–
Red area: overspeed
– Ignition Timing
Shows the current global ignition timing in °crankshaft.
– Spark Plugs
Displays the present operating hours of the spark plugs.