manualshive.com logo in svg

Motorola WiNG 5.4.2, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.4.2 Скачать руководство пользователя страница 814

B - 24 WiNG 5.4.2 Access Point System Reference Guide 

B.3.6 Open SSL License

LICENSE ISSUES

 ==============

The OpenSSL toolkit stays under a dual license, i.e. both the conditions of   the OpenSSL License and the original SSLeay license 
apply to the toolkit.   See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case 
of any license issues related to OpenSSL please contact 

[email protected]

.

OpenSSL License

====================================================================

Copyright (c) 1998-2008 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following 
conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer 

in documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: "This 

product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (

http://www.openssl.org/)

"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products derived from this 

software without prior written permission. For written permission, please contact     

[email protected]

.

5. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior 

written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software 

developed by the OpenSSL Project for use in the OpenSSL Toolkit (

http://www.openssl.org/)

"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young (

[email protected]

). This product includes software 

written by Tim Hudson (

[email protected]

).

Original SSLeay License

-----------------------

Copyright (C) 1995-1998 Eric Young (

[email protected]

) All rights reserved.

This package is an SSL implementation written by Eric Young (

[email protected]

). The implementation was written so as to 

conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following 
conditions apply to all code found in this distribution, be it the RC4, RSA, hash, DES, etc., code; not just the SSL code. The SSL 
documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson 
(

[email protected]

).

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды