manualshive.com logo in svg

Motorola WiNG 5.4.2, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.4.2 Скачать руководство пользователя страница 618

12 - 46 WiNG 5.4.2 Access Point System Reference Guide 

6. Select the following 

Additional Credentials

 required for the generation of the self signed certificate:

7. Select the 

Generate Certificate

 button at the bottom of the Create Certificate screen to produce the certificate. 

12.2.4 Generating a Certificate Signing Request (CSR)

Certificates

A 

certificate signing request

 (CSR) is a message from a requestor to a certificate authority to apply for a digital identity 

certificate. The CSR is composed of a block of encrypted text generated on the server the certificate will be used on. It contains 
information included in the certificate, including organization name, common name (domain name), locality and country. 

A RSA key must be either created or applied to the certificate request before the certificate can be generated. A private key is 
not included in the CSR, but is used to digitally sign the completed request. The certificate created with a particular CSR only 
worked with the private key generated with it. If the private key is lost, the certificate is no longer functional. The CSR can be 
accompanied by other identity credentials required by the certificate authority, and the certificate authority maintains the right 
to contact the applicant for additional information.

If the request is successful, the CA sends an identity certificate digitally signed with the private key of the CA.

To create a CSR:

1. Select 

Operations.

2. Select 

Certificates

.

 

3. Select 

Create CSR.

 

State (ST) 

Enter a State/Prov. for the state or province name used in the certificate. This is a required 
field.

City (L)

Enter a City to represent the city name used in the certificate. This is a required field.

Organization (O)

Define an Organization for the organization used in the certificate. This is a required field.

Organizational Unit 
(OU)

Enter an Org. Unit for the name of the organization unit used in the certificate. This is a 
required field. 

Common Name (CN)

If there’s a common name (IP address) for the organizational unit issuing the certificate, enter 
it here.

Email Address

Provide an email address used as the contact address for issues relating to this certificate 
request.

Domain Name)

Enter a

 fully qualified domain name 

(FQDN) is an unambiguous domain name that specifies 

the node's position in the DNS tree hierarchy absolutely. To distinguish an FQDN from a 
regular domain name, a trailing period is added. An FQDN differs from a regular domain name 
by its absoluteness; as a suffix is not added.

IP Address

Specify the IP address used as the destination for certificate requests.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды