Motorola WiNG 5.4.2, Справочное руководство системы

Страница: 437 / 836

6 - 81
2. Select Wireless.
3. Select Smart RF.
The Basic Configuration screen displays by default.
4. Select the Activate SMART RF Policy option to enable the parameters on the screen for configuration. The configuration
cannot be applied to the access point profile unless this settings is selected and remains enabled.
Figure 6-35 SMART RF - Basic Configuration screen
5. Refer to the Basic Settings field to enable a Smart RF policy and define its sensitivity and detector status.
Sensitivity Select the radio button corresponding to the desired Smart RF sensitivity. Options include
Low , Medium , High and Custom . The default setting is Medium.
SMART RF Policy Enable Select this radio button to enable Smart RF for immediate inclusion within a RF Domain.
Smart RF is enabled by default.
Interference Recovery Select this radio button to enable Interference Recovery when radio interference is
detected within the access point’s radio coverage area. When interference is detected,
Smart RF first determines the power increase needed based on the signal to noise ratio
for a client (as seen by the access point radio). If a client’s signal to noise value is above
the threshold, the transmit power is increased until the signal to noise rate falls below the
threshold. This setting is enabled by default.
Coverage Hole Recovery Select this radio button to enable Coverage Hole Recovery when a radio coverage hole is
detected within the Smart RF supported radio coverage area. When coverage hole is
detected, Smart RF first determines the power increase needed based on the signal to
noise ratio for a client as seen by the access point radio. If a client’s signal to noise value
is above the threshold, the transmit power is increased until the signal to noise rate falls
below the threshold.