Motorola WiNG 5.4.2, Справочное руководство системы

Страница: 214 / 836

5 - 148 WiNG 5.4.2 Access Point System Reference Guide
Figure 5-93 Device Overrides - Basic Configuration screen
5. Set the following Configuration settings for the target device:
6. Refer to the Device Overrides field to assess whether overrides have been applied to the device’s configuration. Use the
Clear Overrides button to clear all device overrides and reset the configuration to its default values.
7. Refer to the Set Clock field to update the system time.
Refer to the Device Time parameter to assess the device’s current time. If the device’s time has not been set, the device
time is displayed as unavailable. Select Refresh to update the device’s system time.
Use the New Time parameter to set the calendar day, hour and minute. Use the AM and PM radio buttons to refine whether
the updated time is for the AM or PM. This time can be synchronized with the use of an external NTP resource.
When completed, select Update Clock to commit the updated time to the device.
8. Select OK to save the changes to the basic configuration. Selecting Reset reverts the screen to its last saved configuration.
System Name Provide the selected device a system name up to 64 characters in length. This is the
device name that appears within the RF Domain or Profile the access point supports and
is identified by.
Area Assign the access point an Area representative of the location the access point is
physically deployed. The name cannot exceed 64 characters. Assigning an area is helpful
when grouping access points in Profiles, as access points in the same physical
deployment location may need to share specific configuration parameters in respect to
radio transmission and interference requirements specific to that location.
Floor Assign the target a access point a building Floor name representative of the location the
access point was physically deployed. The name cannot exceed 64 characters. Assigning
a building floor name is helpful when grouping devices in Profiles, as devices on the same
physical building floor may need to share specific configuration parameters in respect to
radio transmission and interference requirements specific to that location.