Motorola WiNG 5.4.2 Скачать руководство пользователя страница 422

Страница: 422 / 836

6 - 66 WiNG 5.4.2 Access Point System Reference Guide

Radio QoS Configuration and Deployment Considerations

Radio QoS Policy

Before defining a radio QoS policy, refer to the following deployment guidelines to ensure the configuration is optimally
effective:

• To support QoS, each multimedia application, wireless client and WLAN is required to support WMM.

• WMM enabled clients can co-exist with non-WMM clients on the same WLAN. Non-WMM clients are always assigned a

Best Effort access category.

• Motorola Solutions recommends default WMM values be used for all deployments. Changing these values can lead to

unexpected traffic blockages, and the blockages might be difficult to diagnose.

• Overloading an access point radio with too much high priority traffic (especially voice) degrades the overall service quality

for all users.

• TSPEC admission control is only available with newer voice over WLAN phones. Many legacy voice devices do not support

TPSEC or even support WMM traffic prioritization.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WiNG 5.4.2

Отзывы:

Motorola WiNG 5.4.2, Справочное руководство системы, Страница: 422 / 836

Результаты поиска

Содержание WiNG 5.4.2

Отзывы: