manualshive.com logo in svg

Motorola WiNG 5.4.2, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.4.2 Скачать руководство пользователя страница 679

13 - 53

The 

System

 field displays the following:

The 

System Resources 

field displays the following:

The 

Fan Speed 

field displays the following:

The 

Temperature 

field displays the following:

Model Number

Displays the model as either AP650, AP6511, AP6521, AP6522, AP6532, AP6562, AP8132, 
AP71xx etc.

Serial Number

Displays the numeric serial number set for the access point.

Version

Displays the software (firmware) version on the access point.

Boot Partition

Displays the boot partition type.

Fallback Enabled

Displays whether this option is enabled. This method enables a user to store a known legacy 
version and a new version in device memory. The user can test the new software, and use an 
automatic fallback, which loads the old version on the access point if the new version fails.

Fallback Image 
Triggered

Displays whether the fallback image was triggered. The fallback image is an old version of a 
known and operational software stored in device memory. This allows a user to test a new 
version of software. If the new version fails, the user can use the old version of the software.

Next Boot

Designates this version as the version used the next time the AP is booted.

Available Memory

Displays the available memory (in MB) available on the access point.

Total Memory

Displays the access point’s total memory. 

Currently Free RAM

Displays the access point’s free RAM space. If its very low, free up some space by closing 
some processes.

Recommended RAM

Displays the recommended RAM required for routine operation.

Current File 
Description

Displays the access point’s current file description. 

Maximum File 
Description

Displays the access point’s maximum file description.

CPU Load 1 Minute

Lists this access point’s CPU utilization over a 1 minute span.

CPU Load 3 Minutes

Lists this access point’s CPU utilization over a 3 minute span.

CPU Load 5 Minutes

Lists this access point’s CPU utilization over a 5 minute span.

Number

Displays the number of fans supported on the this access point.

Speed (Hz)

Displays the fan speed in Hz. 

Number

Displays the number of temperature elements used by the access point.

Temperature

Displays the current temperature (in Celsius) to assess a potential access point overheat 
condition.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды