manualshive.com logo in svg

Motorola WiNG 5.4.2, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.4.2 Скачать руководство пользователя страница 48

3 - 12 WiNG 5.4.2 Access Point System Reference Guide 

Figure 3-10

Initial Setup Wizard - Wireless LAN Setting screen

11. Set the following parameters for each of the WLAN configurations available as part of this Initial Setup Wizard:

•

SSID

 - Enter or modify the 

Services Set Identification

 (SSID) associated with the WLAN. The WLAN name is auto-

generated using the SSID until changed by the user. The maximum number of characters is 32. Do not use < > | “ & \  ? , 
This is a required parameter for each WLAN.

•

WLAN Type

 - Set the data protection scheme used by clients and access points within the WLAN. The following options 

are available:

•

No Authentication and no Encryption

 - Select this option to provide no security between the access point and 

connected clients on this WLAN. 

•

Captive Portal Authentication and No Encryption

 - Select this option to use a Web page (either internally or 

externally hosted) to authenticate users before access is granted to the network. If using this option, define whether a 
local or external RADIUS authentication resource is used.

•

PSK Authentication and WPA2 Encryption

 - Select this option to implement a pre-shared key that must be correctly 

shared between the access point and requesting clients using this WLAN. If using this option, specify a WPA key in either 
ASCII (8-63 characters) or HEX (64 characters) format.

•

EAP Authentication and WPA2 Encryption

 - Select this option to authenticate clients within this WLAN through the 

exchange and verification of certificates. If using this option, define whether a local or external RADIUS authentication 

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды