manualshive.com logo in svg

Motorola WiNG 5.4.2, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.4.2 Скачать руководство пользователя страница 144

5 - 78 WiNG 5.4.2 Access Point System Reference Guide 

5. Select 

Add 

to define a new Bridge VLAN configuration,

 Edit

 to modify the configuration of an existing Bridge VLAN 

configuration or 

Delete 

to remove a VLAN configuration.

Figure 5-44

Network - Bridge VLAN Configuration screen

6. If adding a new Bridge VLAN configuration, use the spinner control to define a 

VLAN ID 

from 1 - 4095. This value must be 

defined and saved before the 

General

 tab can become enabled and the remainder of the settings defined.

7. If creating a new Bridge VLAN, provide a 

Description

 (up to 64 characters) unique to the VLAN’s specific configuration to 

help differentiate it from other VLANs with similar configurations.

Edge VLAN Mode

Defines whether the VLAN is currently in edge VLAN mode. An edge VLAN is the VLAN 
where hosts are connected. For example, if VLAN 10 is defined with wireless clients 
and VLAN 20 is where the default gateway resides, VLAN 10 should be marked as an 
edge VLAN and VLAN 20 shouldn’t be marked as an edge VLAN. When defining a VLAN 
as edge VLAN, the firewall enforces additional checks on hosts in that VLAN. For 
example, a host cannot move from an edge VLAN to another VLAN and still keep 
firewall flows active.

Trust ARP Response

When ARP trust is enabled, a green check mark displays. When disabled, a red “X” 
displays. Trusted ARP packets are used to update the IP-MAC Table to prevent IP spoof 
and arp-cache poisoning attacks.

Trust DHCP Responses

When DHCP trust is enabled, a green check mark displays. When disabled, a red “X” 
displays. When enabled, DHCP packets from a DHCP server are considered trusted and 
permissible within the network. DHCP packets are used to update the DHCP Snoop 
Table to prevent IP spoof attacks.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды