manualshive.com logo in svg

Motorola WiNG 5.4.2, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.4.2 Скачать руководство пользователя страница 328

5 - 262 WiNG 5.4.2 Access Point System Reference Guide 

18. Select 

Add

 to create a new Dynamic NAT configuration, 

Edit

 to modify or override an existing configuration or 

Delete

 to 

permanently remove a configuration.

Figure 5-168

Profile Overrides - Security - NAT - Source NAT screen

19. Set or override the following to define the 

Dynamic NAT

 configuration:

20. Select

 OK

 to save the changes or overrides made to the dynamic NAT configuration. Select 

Reset

 to revert to the last saved 

configuration.

Source List ACL

Use the drop-down menu to select an ACL name to define the packet selection criteria for 
NAT. NAT is applied only on packets which match a rule defined in the access-list. These 
addresses (once translated) will not be exposed to the outside world when the translation 
address is used to interact with the remote destination.

Network

Select 

Inside

 or 

Outside

 NAT as the network direction for the dynamic NAT configuration. 

Inside is the default setting.

Interface

Select the VLAN (from 1 - 4094) or WWAN used as the communication medium between 
the source and destination points within the NAT configuration. Ensure the VLAN selected 
adequately supports the intended network traffic within the NAT supported configuration.

Overload Type

Select this option of Overload Type used with the listed IP ACL rule. Options include 

NAT 

Pool, One Global Address and Interface IP Address

. Interface IP Address is the default 

setting.

NAT Pool

Provide the name of an existing NAT pool for use with the dynamic NAT configuration. 

Overload IP

If One Global IP Address is selected as the Overload Type, define an IP address used a 
filter address for the IP ACL rule.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды