Motorola WiNG 5.4.2 Скачать руководство пользователя страница 78

Страница: 78 / 836

5 - 12 WiNG 5.4.2 Access Point System Reference Guide

5.2.4.1 Ethernet Port Configuration

Profile Interface Configuration

Displays the physical port name reporting runtime data and statistics. The following ports are available depending on model:

• AP6511 - fe1, fe2, fe3, fe4, up1

• AP6521

- GE1/POE (LAN)

• AP6522

- GE1/POE (LAN)

• AP6532

- GE1/POE (LAN)

• AP6562 - GE1/POE (LAN)

• AP7131 - GE1/POE (LAN), GE2 (WAN)

• AP7161 - GE1/POE (LAN), GE2 (WAN)

• AP8132 - GE1/POE (LAN), GE2 (WAN)

To define a profile’s Ethernet port configuration:

1. Select the

Configuratio

n tab from the Web UI.

2. Select

Devices

3. Select

System Profile

from the options on left-hand side of the UI.

4. Expand the

Interface

menu and select

Ethernet Ports

Figure 5-6

Profile Interfaces - Ethernet Ports screen

5. Refer to the following to assess port status, mode and VLAN configuration:

Name

Displays the physical port name reporting runtime data and statistics. Supported ports
vary depending model.

Type

Displays the physical port type.

Description

Displays an administrator defined description for each listed port.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WiNG 5.4.2

Отзывы:

Motorola WiNG 5.4.2, Справочное руководство системы, Страница: 78 / 836

Результаты поиска

Содержание WiNG 5.4.2

Отзывы: