manualshive.com logo in svg

Motorola WiNG 5.4.2, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.4.2 Скачать руководство пользователя страница 672

13 - 46

WiNG 5.4.2 Access Point System Reference Guide 

13.2.12 Captive Portal

RF Domain Statistics

A captive portal is guest access policy for providing guests temporary and restrictive access to the wireless network. Captive 
portal authentication is used primarily for guest or visitor access to the network, but is increasingly being used to provide 
authenticated access to private network resources when 802.1X EAP is not a viable option. Captive portal authentication does 
not provide end-user data encryption, but it can be used with static WEP, WPA-PSK or WPA2-PSK encryption.

To view the RF Domain captive portal statistics:

1. Select the 

Statistics

 menu from the Web UI.

2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.

3. Select 

Captive Portal

 from the RF Domain menu.

Figure 13-25

RF Domain - Captive Portal

The screen displays the following 

Captive Portal

 data for requesting clients:

Client MAC

Displays the MAC address of each listed client requesting captive portal access to the 
network. This address can be selected to display client information in greater detail.

Client IP

Displays the IP address of each listed client using its connected RF Domain member 
access point for captive portal access.

Captive Portal

Lists the name of the RF Domain captive portal currently being utilized by each listed 
client.

Authentication

Displays the authentication status of requesting clients attempting to connect to the 
controller via the captive portal.

WLAN

Displays the name of the controller WLAN the requesting client would use for 
interoperation with the controller.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды