Motorola WiNG 5.4.2 Скачать руководство пользователя страница 389

Страница: 389 / 836

6 - 33

Figure 6-13

WLAN Accounting screen

6. Set the following

Syslog Accounting

information:

7. Select

Enable RADIUS Accounting

to use an external RADIUS resource for AAA accounting. When the radio button is

selected, a

AAA Policy

field displays. Either use the default AAA policy with the WLAN, or select

Create

to define a new

AAA configuration that can be applied to the WLAN. This setting is disabled by default.

8. Select

when completed to update this WLAN’s accounting settings. Select

Reset

to revert the screen back to its last

saved configuration.

Enable System Log
Accounting

Select this option for the access point to generate accounting records in standard syslog
format (RFC 3164). The feature is disabled by default.

Syslog Host

Specify the IP address (or hostname) of the external syslog host where accounting records
are routed.

Syslog Port

Use the spinner control to set the destination UDP port of the external syslog host where
accounting records are routed. The default port is 514.

Proxy Mode

Use the drop-down menu to define how syslog accounting is conducted. Options include

None, Through Wireless Controller

and

Through RF Domain Manager

Format

Select the format used to include (pack) the MAC address in a syslog request. Options
include

No Delimiter (aabbccddeeff), Colon Delimiter (aa:bb:cc:dd:ee:ff), Dash Delimiter

(aa-bb-cc-dd-ee-ff), Dot Delimiter per four (aabb.ccdd.eef)

and

Middle Dash Delimiter

(aabbcc-ddeeff)

. The default setting is Dash Delimiter (aa-bb-cc-dd-ee-ff).

Case

Use the drop-down menu to specify whether the MAC address format supplied is
specified in

upper

lower

case. The default setting is upper case.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WiNG 5.4.2

Отзывы:

Похожие инструкции для WiNG 5.4.2

Бренды по названию

Популярные бренды

Motorola WiNG 5.4.2, Справочное руководство системы

Результаты поиска

Содержание WiNG 5.4.2

Отзывы:

Похожие инструкции для WiNG 5.4.2

Бренды по названию

Популярные бренды