Motorola WiNG 5.4.2, Справочное руководство системы

Страница: 222 / 836

5 - 156 WiNG 5.4.2 Access Point System Reference Guide
10. Select OK to export the defined trustpoint. Select Cancel to revert the screen to its last saved configuration.
To optionally delete a trustpoint, select the Delete button from within the Certificate Management screen. Provide the
trustpoint name within the Delete Trustpoint screen and optionally select the Delete RSA Key check box to remove the
RSA key along with the trustpoint. Select OK to proceed with the deletion, or Cancel to revert to the Certificate
Management screen.
5.4.2.1.1 RSA Key Management
Certificate Management
Refer to the RSA Keys screen to review existing RSA key configurations applied to managed devices. If an existing key does
not meet the needs of a pending certificate request, generate a new key or import or export an existing key to and from a remote
location.
Rivest, Shamir, and Adleman (RSA) is an algorithm for public key cryptography. It’s an algorithm that can be used for certificate
signing and encryption. When a device trustpoint is created, the RSA key is the private key used with the trustpoint.
To review existing device RSA key configurations, generate additional keys or import/export keys to and from remote locations:
1. Select the Launch Manager button from either the SSH RSA Key or RADIUS Server Certificate parameters (within the
Certificate Management screen).
2. Select RSA Keys from the upper, left-hand side of the Certificate Management screen.
Protocol Select the protocol used for exporting the target trustpoint. Available options include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
Port If using Advanced settings, use the spinner control to set the port. This option is not valid
for cf , usb1 , and usb2 .
IP Address If using Advanced settings, enter IP address of the server used to export the trustpoint.
This option is not valid for cf , usb1 , and usb2 .
Host If using Advanced settings, provide the hostname of the server used to export the
trustpoint. This option is not valid for cf , usb1 , and usb2 .
Path/File If using Advanced settings, specify the path to the trustpoint. Enter the complete relative
path to the file on the server.
Username/Password These fields are enabled if using ftp or sftp protocols,. Specify the username and the
password for that username to access the remote servers using these protocols.