manualshive.com logo in svg

Motorola WiNG 5.4.2, Справочное руководство системы

Motorola WiNG 5.4.2 - это передовая система управления Wi-Fi, обеспечивающая надежное и эффективное подключение. Скачайте бесплатное System Reference Manual для полного понимания функциональности и настроек устройства. Загрузите его с manualshive.com и погрузитесь в мир современных технологий.

Поделиться
Скачать
background image

5 - 79

8. Firewalls, generally, are configured for all interfaces on a device. When configured, firewalls generate a large amount of 

flow tables that store information on the traffic that is allowed to traverse through the firewall. These flow tables occupy 
a large portion of the limited memory on the device that could be used for other critical purposes. With the Per VLAN 
firewall feature enabled on an interface, flow tables are only generated for that interface, Flow tables are not generated 
for those interfaces where this feature is not enabled. This frees up memory that can be used for other purposes.

Firewall can be switched off for those interfaces which are known to carry trusted traffic and only enabled on the interfaces 
that can provide a vector for an attack on the network. Select the 

Per VLAN Firewall

 option to enable firewall on this 

interface.

9. Broadcast Optimization prevents flooding of ARP packets over the virtual interface. Based on the learned information, ARP 

packets are filtered at the wireless controller level.

Select the 

L2 Tunnel Broadcast Optimization

 option to prevent flooding of ARP packets on this bridge interface.

10. Define the following 

Extended VLAN Tunnel 

parameters:

11. Define the following

 Layer 2 Firewall 

parameters:

12. Select the 

OK

 button located at the bottom right of the screen to save the changes. Select 

Reset

 to revert to the last saved 

configuration.

Bridging Mode

Specify one of the following bridging mode for use on the VLAN:

•

Automatic

: Select Automatic mode to let the access point determine the best 

bridging mode for the VLAN.

•

Local

: Select Local to use local bridging mode for bridging traffic on the VLAN.

•

Tunnel

: Select Tunnel to use a shared tunnel for bridging traffic on the VLAN. Tunnel 

must be selected to successfully create a mesh connection between two Standalone 
APs.

•

isolated-tunnel

: Select isolated-tunnel to use a dedicated tunnel for bridging traffic 

on the VLAN.

IP Outbound Tunnel ACL

Select an

 IP Outbound Tunnel ACL 

for outbound traffic from the drop-down menu. If an 

appropriate outbound IP ACL is not available select the create icon to make a new one.

MAC Outbound Tunnel ACL

Select a 

MAC Outbound Tunnel ACL 

for outbound traffic from the drop-down menu. If 

an appropriate outbound MAC ACL is not available select the create icon to make a new 
one.

NOTE: 

 If creating a mesh connection between two access points in Standalone AP 

mode, 

Tunnel

 must be selected as the Bridging Mode to successfully create the mesh 

link between the two access points.

Trust ARP Response

Select this option to use trusted ARP packets to update the DHCP Snoop Table to 
prevent IP spoof and arp-cache poisoning attacks. This feature is disabled by default.

Trust DHCP Responses

Select this option to use DHCP packets from a DHCP server as trusted and permissible 
within the network. DHCP packets are used to update the DHCP Snoop Table to prevent 
IP spoof attacks. This feature is disabled by default.

Enable Edge VLAN Mode

Select this option to enable edge VLAN mode. When selected, the IP address in the 
VLAN is not used for normal operations, as its now designated to isolate devices and 
prevent connectivity. This feature is enabled by default.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для WiNG 5.4.2

Mustek CDD461AM User Manual preview
CDD461AM
Бренд: Mustek Страницы: 67
Verizon Jetpack MiFi 4510L User Manual preview
Jetpack MiFi 4510L
Бренд: Verizon Страницы: 88
Alfa Network AWPCI085P Specifications preview
AWPCI085P
Бренд: Alfa Network Страницы: 1
Zte Unite User Manual preview
Unite
Бренд: Zte Страницы: 29
Samsung WCH730B User Manual preview
WCH730B
Бренд: Samsung Страницы: 6
Samsung SM-V101F User Manual preview
SM-V101F
Бренд: Samsung Страницы: 38
Magnum M9-AP3 Quick Start Manual preview
M9-AP3
Бренд: Magnum Страницы: 2
Enterasys R1 SOHO Setup And Installation Manual preview
R1 SOHO
Бренд: Enterasys Страницы: 52
Quectel AF50T Hardware Design preview
AF50T
Бренд: Quectel Страницы: 55
Spectrum Technologies WatchDog 3388BC Product Manual preview
WatchDog 3388BC
Бренд: Spectrum Technologies Страницы: 10
Sierra Wireless AirCard W801 User Manual preview
AirCard W801
Бренд: Sierra Wireless Страницы: 164
VideoHome PC2TVWiFi User'S Manual And Operation Manual preview
PC2TVWiFi
Бренд: VideoHome Страницы: 21
Black Box SmartPath LWN602WA Installation Manual preview
SmartPath LWN602WA
Бренд: Black Box Страницы: 20
Black Box LW6005A-R2 Manual preview
LW6005A-R2
Бренд: Black Box Страницы: 102
Icidu NI-707517 Quick Installation Manual preview
NI-707517
Бренд: Icidu Страницы: 7
Sapido RB-1232 User Manual preview
RB-1232
Бренд: Sapido Страницы: 112
3Jtech G2Wifi II User Manual preview
G2Wifi II
Бренд: 3Jtech Страницы: 87
HAC UM Series Manual preview
UM Series
Бренд: HAC Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды