Motorola WiNG 5.4.2 Скачать руководство пользователя страница 489

Страница: 489 / 836

8 - 15

8. Select

+ Add Row

as needed to add additional IP Firewall Rule configurations. Select the

Delete Row

icon as required

to remove selected IP Firewall Rules.

9. Select

when completed to update the IP Firewall rules. Select

Reset

to revert back to the last saved configuration.

Action

The following actions are supported:

•

Log

- Events are logged for archive and analysis.

•

Mark

- Modifies certain fields inside the packet and then permits them. Therefore,

mark is an action with an implicit permit.
• VLAN 802.1p priority.
• DSCP bits in the IP header.

•

Mark, Log

- Conducts both mark and log functions.

Precedence

Use the spinner control to specify a precedence for this IP policy from 1 - 5000. Rules with
lower precedence are always applied first to packets.

Description

Provide a description to help differentiate it from others with similar configurations.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WiNG 5.4.2

Отзывы:

Бренды по названию

Популярные бренды

Motorola WiNG 5.4.2, Справочное руководство системы

Результаты поиска

Содержание WiNG 5.4.2

Отзывы:

Бренды по названию

Популярные бренды