Motorola WiNG 5.4.2 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 836

Motorola WiNG 5.4.2 Скачать руководство пользователя страница 30

2 - 6

WiNG 5.4.2 Access Point System Reference Guide

2.2.4 Status Icons

Icon Glossary

These icons define device status, operations on the wireless controller, or any other action that requires a status being returned
to the user.

2.2.5 Configurable Objects

Icon Glossary

These icons define configurable items within the UI.

Fatal Error – States there is an error causing a managed device to stop
functioning.

Error – Indicates an error exits requiring intervention. An action has failed, but
the error is not system wide.

Warning – States a particular action has completed, but some errors were
detected that did not stop the process from completing. Intervention might
still be required to resolve subsequent warnings.

Success – Indicates everything is well within the network or a process has
completed successfully without error.

Information – This icon always precedes information displayed to the user.
This may either be a message displaying progress for a particular process, or
may just be a message from the system.

Device Configuration – Represents a configuration file applicable to a device
category.

Auto Provisioning Policy – Represents an adoption policy as a set of
configuration parameters that define how wireless clients are adopted to the
access point.

Wireless LANs – States an action impacting a WLAN has occurred.

WLAN QoS Policy – States a

Quality of Service

(QoS) policy configuration has

been impacted.

«
...
28
29
30
31
32
...
»

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов