Motorola WiNG 5.4.2, Справочное руководство системы

Страница: 664 / 836

13 - 38 WiNG 5.4.2 Access Point System Reference Guide
The Security tab displays the following:
Root MP ID The Mesh Point ID of the neighbor's Root Mesh Point.
Is Root A Root Mesh Point is defined as a Mesh Point that is connected to the WAN and provides
a wired backhaul to the network.
Yes if the Mesh Point that is the neighbor is a Root Mesh
Point or No if the Mesh Point that is the neighbor is not a Root Mesh Point.
Mobility Displays whether the mesh point is a mobile or static node. Displays True when the device
is mobile and False when the device is not mobile.
Radio Interface This indicates the interface that is used by the device to communicate with this neighbor.
The values are
2.4 and 5.8 , indicating the frequency of the radio that is used to
communicate with the neighbor.
Resourced Displays whether the mesh point has been resourced or not. The Mesh Connex neighbor
table can contain more neighbors than the AP supports. If the neighbor is resourced, it will
take away a one of the resources for a wireless client device to be used for meshing.
Displays
True when the device is resourced and False when the device is not.
Link Quality An abstract value depicting the quality of the mesh link between the device and the
neighbor. The range is from
0 (weakest) to 100 (strongest).
Link Metric This value shows the computed path metric from the device to the neighbor Mesh Point
using this interface. The lower the number the better the possibility that the neighbor will
be chosen as the path to the Root Mesh Point.
Root Metric The computed path metric between the neighbor and their Root Mesh Point.
Age Displays the number of milli-seconds since the mesh point last heard from this neighbor.
Mesh Point Name Displays the name of each configured Mesh Point in the RF Domain.
MP ID The MP identifier is used to distinguish between other Mesh Points both on the same
device and on other devices. This is used by a user to setup the preferred root
configuration.
IF ID The IFID uniquely identifies an interface associated with the MPID. Each Mesh Point on a
device can be associated with one or more interfaces.
Radio Interface This indicates the interface that is used by the device to communicate with this neighbor.
The values are 2.4 and 5.8, indicating the frequency of the radio that is used to
communicate with the neighbor.
Link State Displays the Link State for each Mesh Point:
• Init - indicates the link has not been established or has expired.
• Enabled - indicates the link is available for communication.
• Failed - indicates the attempt to establish the link failed and cannot be retried yet.
• In Progress - indicates the link is being established but is not yet available.
Link Timeout Displays the maximum value in seconds that the link is allowed to stay in the In Progress
state before timing out.