manualshive.com logo in svg

Motorola WiNG 5.4.2, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.4.2 Скачать руководство пользователя страница 535

9 - 31

6. Set the 

Schedule

 to configure access times and dates. Select 

Restrict Access By Time

 control to enable time based 

access.

7. Select 

Restrict Access By Day Of Week

 control to enable access based on the day of the week.

8. Click the 

OK

 to save the changes. Select 

Reset

 to revert to the last saved configuration.

VLAN

Select this option (and use the slider) to assign a specific VLAN to this RADIUS user group. 
Ensure Dynamic VLAN assignment (Single VLAN) is enabled for the WLAN for the VLAN 
to work properly. For more information, see 

Basic WLAN Configuration on page 6-5

.

WLAN SSID

Assign a list of SSIDs (users) the RADIUS group are allowed to associate to. An SSID 
cannot exceed 32 characters. Assign WLAN SSIDs representative of users a guest user 
will need to access. The parameter is not available if this RADIUS group has been defined 
as a management group.

Rate Limit from Air

Select the check box to set an uplink rate limit for managed clients within this RADIUS 
group. Use the spinner to set value from 100-1,000,000 kbps. Setting a value of 0 disables 
rate limiting.

Rate Limit to Air

Select the check box to set a downlink rate limit from clients within this RADIUS group. 
Use the spinner to set value from 100-1,000,000 kbps. Setting a value of 0 disables rate 
limiting.

Management Group

Select this option to designate the RADIUS group as a management group. If set as 
management group, assign a role to the members of the group using the Access drop-
down menu, allowing varying levels of administrative rights. This feature is disabled by 
default. 

Access

If a group is listed as a management group, assign how the devices can be accessed. 
Available access types are:

•

Web

 - Web access through browser is permitted

•

SSH

 - SSH access through command line is permitted

•

Telnet

 - Telnet access through command line is permitted

•

Console

 - Console access to the device is permitted

Role

If a group is listed as a management group, assign a unique role. Available roles include:
monitor - Read-only access

•

helpdesk

 - Helpdesk/support access

•

network-admin

 - Wired and wireless access

•

security-admin

 - Grants full read/write access

•

system-admin

 - System administrator access

Time Start

Use the spinner control to set the time (in HH:MM format) RADIUS group members are 
allowed to login and access RADIUS server resources (for example, 14:45 = 2:45). Select 
either the 

AM

 or 

PM

 radio button to set the time as morning or evening.

Time Stop

Use the spinner control to set the time (in HH:MM format) RADIUS group members are 
denied access to RADIUS server resources (for example, 15:45 = 3:45). Select either the 

AM

 or 

PM

 radio button to set the time as morning or evening. If already logged in, the 

RADIUS group user is deauthenticated from the WLAN.

Days

Select the day(s) of the week RADIUS group members can access RADIUS resources.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды