manualshive.com logo in svg

Motorola WiNG 5.4.2, Справочное руководство системы

Поделиться
Скачать
Motorola WiNG 5.4.2 Скачать руководство пользователя страница 498

8 - 24 WiNG 5.4.2 Access Point System Reference Guide 

Figure 8-11

Wireless IPS screen - WIPS Events - AP Anomaly tab

AP Anomaly events are suspicious frames sent by neighboring APs. Use the AP Anomaly tab to enable or disable an event.

17. Enable or disable the following 

AP Anomaly Events

:

18. Select 

OK 

to save the updates to the

 

AP Anomaly configuration used by the WIPS policy. Select 

Reset

 to revert to the last 

saved configuration. The WIPS policy can be invoked at any point in the configuration process by selecting 

Activate 

Wireless IPS Policy

 from the upper, left-hand side, of the access point user interface.

19. Select the 

WIPS Signatures 

tab. Ensure the 

Activate Wireless IPS Policy

 option remains selected to enable the 

screen’s configuration parameters.

Name

Displays the name of each AP Anomaly event. This column lists the event tracked against 
the defined thresholds set for interpreting the event as excessive or permitted.

Enable

Displays whether tracking is enabled for each AP Anomaly event. Use the drop-down 
menu to enable/disable events as required. A green check mark defines the event as 
enabled for tracking against its threshold values. A red “X” defines the event as disabled 
and not tracked by the WIPS policy. Each event is disabled by default.

Содержание WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды