Mitsubishi Electric PURY-WP-YJM-A, Справочник данных

Страница: 150 / 220

3. System remote controller
3 - 65 CONTROLLER
Controller
1. Specifications
(1). Device Specifications
*1: For details, refer to "1-(2). Parts Purchased Separately".
*2: Supply electric power from a power unit for the transmission line or an outdoor unit.
Furthermore, the power consumption factor of the M-NET circuitry of this device is "1/4" (equivalent to one ME Remote Controller).
*3: Non-voltage Relay contact or transistor is available for output. Only one can be used at a time.
*4: ( ) is in the case of a pulse.
*5: The output is open collector type. Power must be supplied from an external power source to the output circuit of this device.
*6: Power is supplied from this device to the external contacts.
*7: Power must be supplied from an external power source.
*8: M3 and M3.5 are sizes of the screw on the terminal block (ISO metric screw thread).
The number indicates the screw diameter (mm).
Item Rating and Specification
Power Supply 24 VDC 10%: 5 W (*1)
Screw terminal block
(M3) (*8)
Interface
M-NET communication 17 to 30 VDC (*2)
Screw terminal block
(M3) (*8)
Output
(*3)
ON/OFF,
(ON)
(*4)
Non-voltage Relay contact (2)
Applied load
MAX: 24 VDC, 5 W
MIN: 5 VDC, 2 mW
* AC loads cannot be
connected.
Screw terminal block
(M3.5) (*8)
Transistor (2)
24 VDC 40 mA or less
(*5)
Screwless terminal
block
(OFF)
(*4)
Non-voltage Relay contact (2)
Applied load
MAX: 24 VDC, 5 W
MIN: 5 VDC, 2 mW
* AC loads cannot be
connected.
Screw terminal block
(M3.5) (*8)
Transistor (2)
24 VDC 40 mA or less
(*5)
Screwless terminal
block
Input
ON/OFF
Non-voltage a contact
(2 each)
24 VDC 1 mA or less
(*6)
Screwless terminal
block
Error/Normal
Output
ON/OFF, (ON)
(*4)
Transistor (4 each)
24 VDC 40 mA or less
(*5)
9 pin connector
(OFF) (*4)
Input
ON/OFF
24 VDC input (4 each)
24 VDC 1 mA or less
(*7)
9 pin connector
Error/Normal
Output Pulse Width 1s 30 ms
Interlock
Function
Interlock M-NET devices and output contacts according to status of input contacts. (*8)
Environment
Conditions
Temperature
Operating temperature range 0 to 40 [32 to 104 ]
Storage temperature range -20 to 60 [-4 to 140 ]
Humidity 30 to 90%RH (no condensation)
Dimensions 200 (W) × 120 (H) × 45 (D) mm / 7 7 /
8
(W) × 4 3 /
4
(H) × 1 25 /
32
(D) in
Weight 0.6 kg / 1
3
/
8
lbs
Time Backup
During Power
Failure
In the event of power failure or shut-off, the internal capacitor will continue to track time for approximately one week.
(The internal capacitor takes about 24 hours to fully charge; a replacement battery is not necessary.)
Installation
Environment Inside the metal control board (indoors)
* Use this product in a hotel, a business office environment or similar environment.
Standard
Expansion
1s 30 ms