Mindray Z6 Скачать руководство пользователя страница 79

Страница: 79 / 173

Software Upgrade and Maintenance 6-7

6.5

Software Maintenance

6.5.1

Product Configuration

NOTE:

[Config] is available on the Maintenance menu only if the operator logged on the
system as Service.

1. Make the product configuration file

—PCF file (generated by the production line or already

archived PCF file) according to specific requirements and copy to the USB disk.

2. Connect the USB disk to the machine, click [Config] and load the file in the popped up dialogue

box.

3. Select correct file (PCF format), and click [OK]. After the operation is completed, the successful

prompt appears. Restart the machine according to the prompt.

Specific configuration:

a) Model configuration

b) Customized product logo, hospital logo, screen saver/hibernation icon, active/inactive

icon of dual B mode, system information, boot up/shut down graphics.

NOTE:

After Doppler restoration, please do product configuration manually according to

the practical situation.

6.5.2

Log Maintenance

6.5.2.1

Export the Log

1. Connect the USB disk.

2. Click [Export Log] on the Maintenance menu.

Содержание Z6














































































































































































Результаты поиска

Содержание Z6

Отзывы:

Похожие инструкции для Z6

Бренды по названию

Популярные бренды

Mindray Z6, Руководство по обслуживанию

Результаты поиска

Содержание Z6

Отзывы:

Похожие инструкции для Z6

Бренды по названию

Популярные бренды