Mindray Z6, Руководство по обслуживанию

Страница: 64 / 173

5-10 Function and Performance Checking Method
5.4.2.4 PW Mode

In PW Mode scanning, the image parameter area in the right corner of the screen will display
the real-time parameter values as follows:
Display F G WF PRF SVD SV Angle
Image
Parameters
Frequency
PW/CW
Gain
Wall
Filter
Pulse
Repetition
Frequency
Sample
Volume
Depth
Sample
Volume
Size
Angle

Parameters that can be adjusted to optimize the PW Mode image are indicated in the following.
Adjustment Items
Control Panel Gain
、
Frequency
Menu
Frequency, Acoustic Power ,Scale, Wall Filter, Speed, Duplex/Triplex, SV, Quick
Angle, Angle, Invert, Baseline, Trace Area, T/F Res, Audio, Auto Calc, Auto Calc
Cycle, Auto Calc Para, HPRF, Dynamic Range, Gray Map, Tint Map, Display Format
5.4.2.5 Cine Review
Procedure Standard

Press [Freeze] key to freeze an image, and
the [Cine] key indicator lights on. The system
automatically
enters the manual cine
status.(Prec
ondition: set “Status after Freeze”
to be “Cine”)

Press iStation, click [Review] or press
<Review> to open the cine file

Cine Review status

To enter cine auto cine review status.
Roll the trackball Manual cine review
Click image menu->[Auto Play] Activate auto cine play status
Manually review the images until the frame which
you want to set it as start point, and then click [Set
First Frame] to set a start mark.
Set first frame:
Manually review the images until the frame which
you want to set it as end point, and then click [Set
End Frame] to set an end mark.
Set end frame
Click [Auto Play] The cine is played within the setting region.
Then press the [Cine] key again. Cine review stops

Press the <Freeze> key to defreeze the
image.

<Freeze> backlight is off, the image
returns to the scanning process and exits