Mindray Resona 7, Руководство оператора

Страница: 404 / 451

17-2 System Maintenance
NOTE:
Don’t use cloth with water to clean the probe connector.

Cleaning the probe cable
a) Use soft dry cloth to wipe off stains from the probe cable.
b) If it is difficult to clean the stains thoroughly, use soft cloth dipped with mild detergent, and
then let the cable air dry.

Cleaning holders

Tool: dry soft cloth , soapy water, soft brush

Method:
Surface of power button should be cleaned by dry soft cloth. Remained stain should be washed
out by cloth with clear water or soapy water (NOTE: cloth should not be dipped with too much
water, which may cause electric shock), and then air-dry the surface.
a) Use dry soft cloth to wipe off the dust attached to inside, outside or gap of probe holder or
gel holder. As to small intra-cavity probe holder or its gap, use the soft brush to brush the
dust or stain.
b) Remained stain attached to inside, outside of holder should be washed out by cloth with a
little soapy water and then air-dry after take it out.
c) Gel warmer: Take the gel warmer out after pull out the power supply cable, use dry soft
cloth to wipe off the dust attached to inside and outside, then brush the dust in the gel
warmer or brush the stain with a little soap water and air-dry at last.

Cleaning the monitor and the touch screen

Tool: soft dry cloth ,clear water or soapy water

Method:
Surface of monitor and touch screen should be cleaned with soft dry cloth directly. Remained stain
should be washed out by cloth with a little clear water or soapy water, and then air-dry the surface.