Mindray Resona 7, Руководство оператора

Страница: 286 / 451

11-8 DICOM/HL7
DICOM service setting for Worklist is described as follows:
Name Note
Configure new
service
Device Name
After you set the server (s) in DICOM Server Setting
screen, the name (s) will appear in the drop-down list,
select the name of the Worklist server.
Service Name Default is server-Worklist, and it can be modified.
AE Title
Application Entity title. Here, it is consistent with that of
the Worklist server.
Port
DICOM communication port, 104 by default.Here, the
port should be consistent with that of the Worklist server
port.
Maximum Retries Reserved feature.
Interval Time(s) Reserved feature.
Timeout
Refers to time after which the system will stop trying to
establish a connection to the service.Value: 5
－
60s, in
increments of 5, and 15 by default.
TLS
Transport Layer Security. Select whether to encrypt the
data during network transportation.
Add Click to add the Worklist service to the service list.
Cancel Click to cancel the parameter setting.
Update
Select an item in the service list, change the parameters
in the above area, and click [Update] to update the item
in the service list.
Service list
Delete Click to delete the selected service in the service list.
To set default server
Set the worklist server as the default.
Select an item in the service list, click [Default] and you
can see “Y” in the Default column.
Verify
Click to verify if the two DICOM application entities are
normally connected.