Mindray M5 Exp, Руководство оператора

Страница: 136 / 357

5-56 Image Optimization
To understand the sectional plane, please refer to “5.11.2 Overview”.
Procedures
(1) Set a section (A, B or C) as the current window.
(2) Click [Adjusting VOI] to be “Off” to enter the sectional plane viewing.
(3) Roll the trackball to view the sectional plane.
Positions of the other two sectional planes are indicated in the selected plane. You
can roll the trackball to change the position. As shown in the figure below.
E.g. select A as the current window and roll the trackball, MRP lines (indicating the
position of section A) in the B and C windows move, and image in A window changes.
Tips:
In actual system displaying, different colors of the window box and the section
lines are used to identify the section A, B and C. Here, three types of line are
used.
Section A MPR line=blue
Section B MPR line=yellow
Section C MPR line=orange
Scanning plane and the probe movement
Move the probe across the body surface.
Arrow in the figure below indicates the movement of the probe (you can move the
probe in the contrary direction of the arrow.).
Sectional A
Sectional B Sectional C