Micromeritics Gemini VII 2390a, Руководство оператора

Страница: 278 / 426

Appendix B Gemini VII
B-12 239-42828-01 - Nov 2013
4029- At least two fitted data points are needed for Alpha-S calculations.
4030- Preparations failed in primary data.
4031- Not enough points with a relative pressure in the range [n,n]
4033- Not enough points to generate Dubinin Tabular Report.
4034- Fewer than 2 points available for Dubinin calculations.
4035- Cannot calculate optimized Astakhov exponent: Not enough points with a rel-
ative pressure in the range [(pressure), (pressure)].
Cause: Fewer than two data points fall within the selected Alpha-S range.
Action: Edit the calculation assignments or the fitted Alpha-S range or use a
different reference curve.
Cause: Appropriate data were not available to generate the report.
Action: This message was preceded by a different error message. Refer to the
cause/action of the preceding message.
Cause: Fewer than two data points selected for the Dubinin report fall within
the selected relative pressure range.
Action: Edit the calculation assignments or the fitted relative pressure range.
Cause: There are fewer than two valid data points available for the Dubinin
tabular reports.
Action: Examine the calculation assignments in the Collected Data window
of the sample file. At least two micropore pressures must be selected
for inclusion in the Dubinin report.
Cause: There are fewer than two valid data points available for Dubinin
reports in one of the sample files selected for overlaying.
Action: Examine the calculation assignments in the Collected Data window
of the sample file. At least two micropore pressures must be selected
for inclusion in the Dubinin report.
Cause: There are fewer than two valid data points in the relative pressure
range specified. Astakhov reports will not be produced.
Action: Examine the calculation assignments in the Collected Data window
for the sample file. At two pressures in the given range must be
selected for inclusion in the Dubinin report.