Micromeritics Gemini VII 2390a, Руководство оператора

Страница: 285 / 426

Gemini VII Appendix B
239-42828-01 - Nov 2013 B-19
4067- No data points are within the range of pressures in the reference isotherm.
4068- No points were selected for the f-Ratio report.
4070- Unable to load deconvolution model [name].
4071- The selected pressures points do not form a valid set for deconvolution.
4072- The range of pressures selected is too small to deconvolute using this model.
Cause: There are no collected data points within the range of pressures in the
reference isotherm.
Action: Select data points that are in the range of the reference isotherm or
select a more appropriate reference isotherm.
Cause: The collected data column for the f-Ratio report does not have any
points selected.
Action: Edit the collected data window and select points for the f-Ratio
report.
Cause: For some reason, the list of available models was corrupted,
therefore, the model selected could not be loaded for the
deconvolution.
Action: Exit the program and reinstall the software, then try again.
Cause: The data points selected for analysis do not contain enough
information to allow a DFT data reduction.
Action A: Edit data points in the table of the Collected Data window or select
another sample file. At least two points with strictly increasing
pressures and volumes adsorbed are required for a DFT Plus data
reduction.
Action B: Edit the pressure range on the DFT report options window.
Cause: A null result was found using the selected model.
Action: Edit data points in the table of the Collected Data window or select
another sample file. At least two points with strictly increasing
pressures and volumes adsorbed are required for a DFT data
reduction.