Micromeritics Gemini VII 2390a, Руководство оператора

Страница: 274 / 426

Appendix B Gemini VII
B-8 239-42828-01 - Nov 2013
2510- [sample file] Error parsing reports from file [name]. Reports cannot be
produced.
2511- Print job [name] has been cancelled due to insufficient disk space. Delete
unnecessary files and restart the report.
2512- Print job [name] cancelled.
2513- Unable to read the calibration file [file name].
2514- Unable to write the calibration file [file name].
Cause A: One or more data entry fields in the sample file may contain an
invalid character (such as a single quote or double quotes).
Action A: Review the data entry fields (for example, the
Sample
field) and
remove the invalid character.
Cause B: The system was unable to create the usual temporary files during the
report, possibly due to insufficient disk space.
Action B: Check the space available on the hard disk.
Cause C: An internal processing error occurred.
Action C: Contact a Micromeritics service representative if this error message
continues.
Cause: The disk drive does not have required space for the temporary file.
Action: Delete unnecessary files from the disk. At least five megabytes of free
space is required for normal operation.
Cause: The print job was canceled by the operator.
Action: None required.
Cause: An invalid calibration file was selected or one that cannot be read.
Action: Ensure the media containing the calibration file has no problems.
Cause: An attempt to save calibration data has failed due to possible media
problems.
Action A: Ensure the destination location has no problems.
Action B: Choose an alternate media to save the calibration data.