Micromeritics Gemini VII 2390a, Руководство оператора

Страница: 289 / 426

Gemini VII Appendix B
239-42828-01 - Nov 2013 B-23
6025- Serial write queue full.
6026- Measure Po for each point is not supported by this model. Choose another
sample file for analysis or change the Po option in the analysis conditions.
6027- Analysis: Po dosing failure
.
6028- This instrument does not provide measured Po analyses.
6029- Instrument is not completely calibrated.
Cause: There was a fatal error in communication between the analyzer and
the software. All displays for that instrument will be closed.
Action: Ensure the Ethernet cable is securely connected. Exit the application
and then restart it. Contact a Micromeritics service representative if
this error message continues.
Cause:
Measure Po for each point
was selected as the saturation method.
This option is only available for the Gemini 2390
p
or 2390
t
.
Action: Edit the Po options in the analysis conditions and select
Entered
or
Most recent measured
as the saturation pressure method.
Cause: The Dewar does not contain enough cryogen to take an accurate
reading in the Po tube.
Action: Refill the Dewar with cryogen and restart the analysis.
Cause: An attempt was made to start an analysis on the Gemini 2390
a
using
a sample file in which
Measure Po for each point
was selected as the
saturation method. This feature is available only for the Gemini
2390
p
and 2390
t.
Action A: Cancel the analysis, open the sample file, and choose
Entered
or
Most recent measured
for the Po value. Restart the analysis.
Action B: Select a different file and continue with the analysis.
Action C: If a Gemini 2390
p
or 2390
t
is attached, select
Start Analysis
for that
unit.
Cause: The instrument in use is missing calibrations.
Action: Select
Unit > Calibration > Load from File
and select a file
containing calibration data. Contact a Micromeritics service
representative if this error message continues.