Micromeritics Gemini VII 2390a, Руководство оператора

Страница: 268 / 426

Appendix B Gemini VII
B-2 239-42828-01 - Nov 2013
2433- New entries have been found in this directory. Refresh the directory
information?
2434- File [file name] — Subset # [n] wrote wrong amount of data.
2436- Path specification [path name] is invalid.
2437- File/Overlay file [file name] does not exist.
2439- Could not register file.
2440- Subset not found.
2441- Seek within file failed.
2442- Bad header in subset file.
2443- Subset owner denied access.
2444- Not a valid file format.
2445- Subset wrote the wrong amount of data.
2446- Error reading data.
2447- Error writing data.
Cause: Several analyzer files (sample information, analysis conditions,
adsorptive properties or report options) have been added to this
directory by some function other than the analyzer program.
Action: Select
Yes
to update the directory information with data from each
new file. This operation may take a minute.
Select
No
to locate the file manually. This option may be feasible if a
large number of files have been copied into the directory and the
name of the file is known.
Cause: An internal processing and/or hardware error has occurred.
Action: Contact your service representative if you continue to receive this
error message.
Cause: An invalid path name and/or extension was entered.
Action: Type a valid path name (including the proper extension) and press
Enter
.
Cause: The entered file specification does not exist.
Action: Enter an existing file specification or select a file name from the list
box.
Cause: An unexpected error occurred when trying to access a data file.
Action: Contact a Micromeritics service representative if this error message
continues.