Mercedes-Benz Actros 2017, Руководство по эксплуатации

Страница: 77 / 436

Example: air-conditioned suspension seat
Before adjusting the seat, read the important
safety notes about the seats. Depending on the
seat design, some adjustment options may not
be available.
X
When adjusting the seat, make sure that there
is sufficient clearance, in particular behind
the seat.
X To adjust the neck cushion: press the press
studs on the rubber straps and adjust neck
cushion
;
accordingly to suit your height.
X
Release the press studs.
X
To set the belt height: press and hold the
button on belt sash guide
:
.
X Adjust belt sash guide
:
accordingly to suit
your height.
X
Release the button.
X
To adjust the armrests: swing seat armrests
=
upwards.
X Use the handwheel on the underside to set
the angle of seat armrests
=
.
X
To adjust the seat cushion angle: press
lever
?
downwards and hold it.
X Apply weight to or relieve the seat cushion or
backrest of any weight in order to move it into
the desired position.
X
Release lever
?
.
X To adjust the backrest: relieve the backrest
of any weight.
X Pull lever
?
up and hold it.
X
Apply weight to or relieve the seat backrest of
any weight in order to move it into the desired
position.
X Release lever
?
.
X
To set the upper portion of the backrest:
pull lever
K
on the rear of the backrest
upward and hold it.
X Tilt the upper portion of the seat backrest to
the desired position.
X
Release lever
K
.
X
To adjust the seat height: pull lever
A
up or
push it down one level.
The seat is raised or lowered by one level.
X
To set the seat fore-and-aft adjustment:
pull lever
E
upwards and hold it.
X
Push the seat forwards or backwards in order
to move it into the desired position.
X Release lever
E
.
X
Slide the seat forwards or backwards until it
engages audibly.
X To adjust the seat cushion length: pull
lever
H
upwards and hold it.
X Push the seat cushion forwards or backwards
in order to move it into the desired position.
X
Release lever
H
.
X To adjust the oscillation damper: set the
oscillation damper level by level using lever
G
to prevent the seat from bottoming out.
X
To release the seat fore-and-aft suspen-
sion lock: move lever
I
downwards.
The seat is able to oscillate freely.
X
To engage the seat fore-and-aft suspen-
sion lock: move lever
I
upwards.
The seat fore-and-aft suspension engages
and the seat suspension is locked in place.
X
To switch on the seat heating: press the
e
upper section of switch
B
.
The seat heating is active and is set to the first
heating level.
or
X
Press the
d
lower section of switch
B
.
The seat heating is active and is set to the
second heating level.
X
To deactivate the seat heating: press
switch
B
into the centre position.
X
To switch on seat ventilation: turn
s
blower control unit
C
from position 0 down-
ward.
The airflow increases in 3 levels.
X To switch off seat ventilation: turn
s
blower control unit
C
completely upward.
Seats
75
Driver's workstation
Z