Mercedes-Benz Actros 2017, Руководство по эксплуатации

Страница: 142 / 436

R
the vehicle speed of the detected vehicle
and the distance to the detected vehicle
(distance control assistant)
R
the lane markings (Lane Keeping Assist)
Backup drive mode menu window
General notes
If the automated transmission shift system is
malfunctioning, you may, under certain circum-
stances, be able to continue your journey in
backup drive mode. It is not possible to change
gear in backup drive mode when the vehicle is in
motion.
The vehicle may respond abnormally in backup
drive mode and therefore requires a high level of
concentration on the part of the driver.
Backup drive mode remains switched on for as
long as the ignition lock is in the drive position.
When you take the key out of the ignition lock,
backup drive mode is switched off. If backup
drive mode is used when the transmission is
cold, the on-board computer may not show the
selected gear. Repeat the gear selection. If the
on-board computer does not display the selec-
ted gear after you have tried to select a gear
several times, switch off the engine. Start the
engine again and select the gear.
Selecting a shift position
X Apply the parking brake.
X Start the engine.
X
Use the
u
or
t
button to scroll to
à
driving mode.
X Use the
r
or
s
button to scroll to the
Backup drive mode
menu window.
The menu window shows the Activate
with "OK"
message.
X Press the
9
button.
The menu window shows the Engage park‐
ing brake
message.
X Press the
u
button.
The input window shows:
R
R for reverse gear
R
N
for neutral
R
D1 for the slow gear, 2nd gear
R
D2 for the fast gear, 6th gear
R
ï
for towing mode
X Select the desired gear, neutral position or
towing mode with the
r
or
s
button
and confirm your selection with the
u
but-
ton.
The on-board computer displays the selected
direction of travel in the status area.
X When the menu window shows the
Ready to
start for 10 seconds
message, depress
the accelerator pedal.
If you are driving in backup drive mode,
Shift
to neutral?
appears in the event window. You
can only shift to neutral position if the vehicle is
in motion.
You can find information on towing in the sec-
tion "Manoeuvring, tow-starting and towing
away" (
Y
page 397).
Video menu window
The
Video
menu window is available for vehicles
fitted with a reversing camera without a Blue-
tooth
® radio/navigation system, Comfort.
X
Use the
u
or
t
button to scroll to
à
driving mode.
X To display the camera image: use the
r
or
s
button to scroll to the
Video
menu
window.
The display in the instrument cluster displays
the camera image.
X To adjust the brightness/contrast: press
9
.
By means of a bar display, the input window
displays the set brightness.
X Select the bar display for brightness/contrast
using the
r
or
s
button.
X
Adjust the brightness/contrast of the camera
image using the
u
or
t
button.
Information on operating the reversing camera
for vehicles with a Bluetooth
®
radio/navigation
system, Comfort, can be found in the "Audio
systems" section (
Y
page 216).
Audio and communications menu
Alarm clock menu window
If your vehicle is equipped with Mercedes-Benz
audio equipment, you can set the radio as an
alarm in alarm mode. If the alarm mode is set to
Radio
and the audio equipment is switched on
at the set alarm time, no further signalling takes
place.
140
On-board computer
On-board computer and displays