Mercedes-Benz Actros 2017, Руководство по эксплуатации

Страница: 118 / 436

Useful information
These Operating Instructions describe all the
models and standard and optional equipment of
your vehicle that were available at the time of
going to print. Country-specific differences are
possible. Bear in mind that your vehicle may not
be equipped with all the functions described.
This also applies to safety-relevant systems and
functions.
Read the information on qualified specialist
workshops (
Y
page 31).
General notes
H
Environmental note
Only switch on the cooling with air dehumidi-
fication function for air conditioning or auto-
matic climate control when necessary. Fuel
consumption increases when the function is
switched on.
The heating/air-conditioning system/auto-
matic climate control can only be operated
when the engine is running.
In order to ensure optimum functioning, close:
R
the windows
R
the sliding sunroof
R
the pop-up roof
R
the roof hatch
The air-conditioning system/automatic climate
control regulates the temperature and humidity
of the cab and filters out undesirable substan-
ces from the air.
The integrated filter largely filters out dust par-
ticles, pollen and unpleasant odours from the air
drawn in from outside or recirculated air in recir-
culation mode. A blocked filter reduces the
amount of air supplied to the cab.
Depending on the operating conditions and
environmental influences, the interval for
replacing the filter may be shorter than speci-
fied.
i Ventilate the vehicle for a brief period during
warm weather. This will speed up the cooling
process and the desired interior temperature
will be reached more quickly.
Overview of climate control system
functions
Heating
:
K
Sets the airflow (
Y
page 121)
;
Ì
Switches residual engine heat utilisa-
tion on/off (
Y
page 122)
=
Sets temperature (
Y
page 120),
z
demists windscreen
?
ø
Switches air recirculation mode
on/off (
Y
page 122)
A
Sets air distribution (
Y
page 121),
Mz
demists windscreen
The heating system is a heating and ventilation
system without a cooling system.
Recommendations for optimal climate control:
R
Slide the temperature control to the centre
position. Only change the temperature in
small increments.
R
Heating with residual engine heat utilisation:
to heat the stationary vehicle, use the residual
heat of the engine after long journeys. The
indicator lamp in the
Ì
button lights up.
R
Only use demisting mode until the misted
windscreen is clear again (
Y
page 121).
R
Only use air-recirculation mode briefly, e.g. if
there are unpleasant odours or in dusty con-
ditions. The windscreen and the window may
otherwise mist up as the flow of fresh air is
deactivated and the air inside the vehicle is
circulated.
116
Overview of climate control system functions
Climate control