X
If the engine starts: leave the engine running
at an increased engine speed.
X
If the engine does not start: repeat the pro-
cedure.
X
Tilt the cab forwards (electrohydraulic
page 374) or mechanical hydraulic
X
Tighten the fuel tank filler cap.
X
Mount covering
:
.
Bleeding the fuel system without fuel
prefilter on chassis frame (OM 936
only)
X
Press and hold the Start/Stop button as far as
it will go, or turn the key to the start position
in the ignition lock and hold it. Do not depress
the accelerator pedal whilst doing so.
i
The starting procedure is automatically can-
celled after approximately 60 seconds.
X
Once the engine starts normally, release the
Start/Stop button or the key in the ignition
lock and depress the accelerator pedal sev-
eral times.
The fuel system is completely bled.
X
If the engine does not start, press and hold the
Start/Stop button again as far as it will go, or
turn the key to the start position in the ignition
lock and hold it.
Bleeding the fuel system with fuel pre-
filter on the chassis frame
H
Environmental note
Dispose of the water-fuel mixture in an envi-
ronmentally responsible manner.
Fuel prefilter on the chassis frame (example: plat-
form truck)
:
Fuel prefilter
;
Drain plug
=
Inspection window
?
Manual fuel pump
A
Bleed screw
Bleeding using the hand pump of the fuel
prefilter on the chassis frame
X
Unscrew the fuel tank filler cap.
X
Place the collector underneath fuel prefil-
ter
:
.
X
Unscrew bleed screw
A
.
X
Push hand pump
?
repeatedly until the fuel
escaping at bleed screw
A
is free of bubbles.
X
Tighten bleed screw
A
.
i
If there was no fuel in the fuel tank, press
hand pump
?
again until there is noticeable
resistance.
Vehicles with OM 460/470/471/473: bleed
also using the hand pump on the main filter:
R
in vehicles with the OM 460 engine
R
in vehicles with the OM 470/471/473
X
Tighten the fuel tank filler cap.
X
Press and hold the Start/Stop button as far as
it will go, or turn the key to the start position
in the ignition lock and hold it. Do not depress
the accelerator pedal whilst doing so.
i
The starting procedure is automatically can-
celled:
R
after approximately 60 seconds on vehicles
with the OM 936 engine
R
after approximately 40 seconds on vehicles
with the OM 470/471/473 engines
In vehicles with the OM 460 engine you must
interrupt the starting procedure after
378
Engine
Breakdown assistance
Содержание Actros 2017
