Preselecting the working speed
General notes
On vehicles with a transmission-driven power
take-off it is possible to preselect the working
speed.
Vehicles with Mercedes PowerShift
You can preselect the working speed using the
multifunction lever.
X
Turn the direction switch to position
i
.
Depending on the previously selected splitter
group, either
N1
or
N2
is shown in the display.
X
To preselect a high working speed: pull the
multifunction lever up briefly.
The high-speed splitter group is selected and
N2
is shown in the display.
X
To preselect a low working speed: push the
multifunction lever down briefly.
The low-speed splitter group is selected and
N1
is shown in the display.
Vehicles with manual transmission
You can preselect the working speed using the
splitter switch.
X
To preselect a high working speed: pull the
splitter switch up.
The high-speed splitter group is selected.
X
To preselect a low working speed: push the
splitter switch down.
The low-speed splitter group is selected.
Engaging power take-off
General notes
Example: power take-off switch (power take-off 1)
U
transmission-driven power take-off 1
T
transmission-driven power take-off 2
S
transmission-driven power take-off 3
(NMV)
The power take-off on the engine is not select-
able. The working speed and body-dependent
functions are controlled and activated when
constant engine speed
F
switched on.
Transmission-driven power take-off (NMV)
S
may only be engaged three times per minute.
Power take-off must be load-free when engag-
ing/disengaging. Also observe the body/equip-
ment mounting directive.
If you want to use a transmission-driven power
take-off and a transmission-independent power
take-off (NMV) simultaneously, observe the cor-
rect sequence when engaging/disengaging.
First engage the transmission-driven power
take-off, then the transmission-independent
power take-off (NMV). When disengaging, first
disengage the transmission-independent power
take-off (NMV), then the transmission-driven
power take-off. Make sure the required power
take-off output does not exceed the maximum
engine power for the given operating point.
Engaging power take-off
X
Stop the vehicle.
X
Apply the parking brake.
X
Shift into neutral.
X
Leave the engine running at idling speed.
X
Vehicles with manual transmission: depress
and hold down the clutch pedal.
342
Power take-offs
Working mode
Содержание Actros 2017
