Mercedes-Benz Actros 2017, Руководство по эксплуатации

Страница: 149 / 436

X
To call up the chassis height: using the
u
or
t
button, select memory position
M1 or M2 for chassis height
A
.
X
Call up the selected memory position by
pressing
s
.
The chassis will be raised/lowered automat-
ically to the stored height.
You can find more information about level con-
trol in the "Driving mode" section (
Y
page 295).
Trailer/semitrailer menu window
The
Trailer
menu window is available when a
trailer/semitrailer is coupled up. The possible
displays depend on your trailer/semitrailer's
equipment. Observe the notes on equipment
and their operation in the manufacturer's oper-
ating instructions for the trailer/semitrailer.
If the axle load is displayed in the
Trailer menu
window, park the vehicle on a level surface and
apply the parking brake.
X Use the
u
or
t
button to scroll to
â
operation and maintenance.
X
Using the
r
or
s
button, scroll to the
Trailer menu window.
X Press the
9
button.
The display shows the first input window, e.g.
Brake info .
X Display the next input window with the
u
or
t
button.
The following information/input windows
may be displayed, depending on the equip-
ment installed:
R
Brake info
displays the temperature and
the wear of the trailer/semitrailer brake
R
Axle loads
displays the overall axle load
of the trailer/semitrailer
R
Tyres displays the tyre pressure of the
trailer/semitrailer tyres
R
Reserve pressure
displays the reservoir
pressure in the trailer/semitrailer
compressed-air reservoir
R
Sideguard Assist trailer monitor‐
ing
displays the Sideguard Assist trailer
monitoring setting. In addition, you can
switch the trailer monitoring of Sideguard
Assist on or off.
Maintenance menu window
! If you confirm maintenance work, without
having it performed according to schedule,
you can damage the vehicle and the assem-
blies. Wear can increase.
If you inadvertently confirm maintenance
work or confirm it too early, the maintenance
system calculates the new maintenance due
date. To prevent damage to the vehicle or
assemblies, have the corresponding mainte-
nance work performed immediately.
Only confirm the maintenance work when the
maintenance work has been performed.
The maintenance system calculates mainte-
nance due dates for the vehicle and its assem-
blies based on the vehicle's operating condi-
tions. The event window automatically displays
maintenance due dates 14 days in advance.
When the maintenance due date has been
reached or exceeded, the on-board computer
shows additional event windows (
Y
page 161).
If the maintenance work is carried out at a
Mercedes-Benz Service Centre, the fact that the
work has been carried out professionally will be
confirmed in the on-board computer and the
service report.
X Using the
u
or
t
button, scroll to
â
operation and maintenance.
X
Using the
r
or
s
button, scroll to the
Maintenance
menu window.
X
To display the maintenance point and due
date: press the
9
button.
The input window shows, for example:
R
the maintenance point
Engine
R
the maintenance due date
23.09.2014
R
the remaining distance 2000 km
If no prediction for the maintenance due date
is possible, the input window shows, for
example:
R
the maintenance point Engine
R
the maintenance due date
--.--.--
X
To display the next maintenance point
and due date: use the
r
or
s
button to
display the next maintenance point.
Depending on the vehicle's equipment, you
can call up the following maintenance points,
for example:
R
Time-based maint.
R
Engine
R
Diesel particle filter
On-board computer
147
On-board computer and displays
Z