Mercedes-Benz Actros 2017, Руководство по эксплуатации

Страница: 362 / 436

X Press locking springs
A
together and push
wiper blade
:
out of the curvature of wiper
arm
=
in the direction of arrow
?
.
X
Remove wiper blade
:
.
X To fit a wiper blade: slide the hinge piece of
the wiper blade into the bend of wiper arm
=
in the direction of arrow
B
.
X
Press the wiper blade into the curvature on
wiper arm
=
until the locking springs engage
audibly.
X
Turn wiper blade
:
parallel to wiper arm
=
.
X
Slide hose
;
onto the pipe jet.
Ensure that hose
;
is firmly fitted onto the
pipe jet.
X
Fold wiper arm
=
onto the windscreen again.
Engine oil level
Checking the engine oil level
Check the engine oil level before the start of
every journey.
X
Check the oil level using the on-board com-
puter (
Y
page 148).
X Top up the oil as shown in the on-board com-
puter.
Topping up the engine oil
! Only use oils which have been approved for
the vehicle and with the prescribed SAE clas-
sification.
Do not add too much oil. If you add too much
oil, the engine or the exhaust system could be
damaged. Have excess oil siphoned off.
Example: cap
Do not add the topping-up quantity shown in the
on-board computer until the menu window
shows the
4
symbol.
You will find information about engine oils in the
"Service products" section (
Y
page 419).
X
Park the vehicle on a level surface.
X
Apply the parking brake.
X Switch off the engine.
X Open the maintenance flap (
Y
page 355).
X
Unscrew and remove black cap
:
.
X
Top up the oil as shown in the on-board com-
puter.
X Replace black cap
:
and screw it on.
X
Close the maintenance flap.
Oil level in the automatic transmis-
sion
General notes
!
If the
Ù
indicator lamp is lit or flashing
while driving, the temperature of the trans-
mission oil or coolant is too high. The reason
for this may be that the transmission oil level
is too high or too low. If the transmission fluid
temperature is frequently too high, there is a
risk of damage to the transmission.
360
Maintenance
Maintenance and care